Understanding the 3D viewport
How Orbis3D turns a grid of elevations into a 3D surface, what the terrain sides, legend and camera controls show, and how scale is kept true.
You will learn
- How a DEM becomes a 3D mesh.
- What the controls, legend and terrain sides in the viewport mean.
- How horizontal and vertical scale are kept consistent.
Prerequisites
Data for this tutorial
Nanda Devi massif, SRTM (real terrain) Download nanda-devi-srtm-1arcsec.tif
- Format
- GeoTIFF, 1 band, Int16, Deflate, tiled
- CRS
- EPSG:4326 (WGS 84, longitude/latitude)
- Content
- Elevations 2285 to 7801 m above the EGM96 geoid; lon 79.7276 to 79.9776, lat 30.2279 to 30.4779
- In Orbis3D
- Data panel ▸ Sample data ▸ Nanda Devi massif, SRTM (real terrain) ▸ Load
- Licence
- SRTM 1 arc-second, NASA/USGS, public domain
Synthetic samples are CC0 1.0; the SRTM sample is public domain. About the datasets
The task
You want to understand what you are looking at in the 3D view, so that you can read it correctly and explain it to others.
From grid to surface
A DEM is a grid of cells, each with one elevation. Orbis3D places a vertex at the centre of every cell (or of every second, third … cell for very large rasters), at the cell's ground position and its elevation, and joins neighbouring vertices into two triangles per grid square. The result is a mesh: a continuous surface made of triangles.
- Horizontal scale comes from the coordinate system. For projected DEMs (UTM, for example) one unit is a metre or a foot. For geographic DEMs in degrees, Orbis3D converts degrees to metres on the WGS 84 ellipsoid at the centre of the first layer, so that a 1 arc-second cell becomes about 30.8 m north–south and 26.7 m east–west at 30° N.
- Vertical scale is the elevation in metres (feet are converted), multiplied by the vertical exaggeration (1.5× when Orbis3D starts).
- NoData cells are left out: triangles that would touch them are not drawn.
- Colours come from a separate image computed at the full working resolution, so a coarse mesh still shows fine colour detail.
Steps
- Load Nanda Devi massif from Data ▸ Sample data, or click Try Nanda Devi (SRTM) in the empty viewport.
- Find the floating camera controls at the top right of the viewport.

From top to bottom: Zoom in, Zoom out, Reset north (the needle points north and rotates as you turn the view), Fit terrain to view, Reset camera, Top view and Orthographic camera. 3. Look at the grey terrain sides under the surface. They are walls from the edge of the surface down to a little below the lowest point, so the terrain reads as a solid block. Turn them off in Scene ▸ Rendering ▸ Show terrain sides. 4. Read the legend at the bottom left. Its title says what the colours mean (Elevation, Slope, Aspect …) and for which layer. 5. Move the pointer over the terrain. The status bar shows the coordinates under the pointer (longitude and latitude for this layer) and the elevation there in metres.
## Expected resultYou can identify the mesh, the terrain sides, the legend and each camera control, and read positions and elevations in the status bar.
Common mistakes
- Reading heights off the colours only. Colours depend on the ramp and range you chose. Use the inspect tool or the status bar for exact values.
- Comparing shapes at different exaggerations. Note the exaggeration (status bar) when you compare screenshots.